Free for everyone, everywhere - No signup - Nothing for sale

Cut your electricity bill.
See exactly what it would take.

Start with your location — your phone knows it — and we size every option that could cut your bill, from 1% all the way to producing a sellable surplus. For any amount you could spend, the price-cut curve shows what it buys, in your local currency. Educational estimates only, nothing for sale. Built and given away by Lucas Ballek.

Start a Free Estimate
$0
Free, always — donations optional
No signup
No account, no email required
50%+
Explore realistic bill-cut scenarios, not promises
Estimates only
Verify with a licensed pro before building

Find your cheapest path to lower bills

Set your monthly bill and your bill-cut target on two sliders — then one click on your location sizes everything against your numbers. Location instantly pulls the local electricity price and re-expresses your bill in that currency; results compare all three chemistries at 60/80/95% cuts, add a 1–150% cut slider for your exact target, and let you click any point on the price-cut curve for the full 20-year analysis. Deterministic, weather-aware, educational.

Mode:
📍 Use my precise location

The precise-location button sizes for your exact coordinates and pulls area prices from the nearest reference city. To check anywhere else, type any city and press Enter or Tab — the location auto-resolves and runs.

I run a generator — what does its power really cost?

Assumes a small genset at typical partial load: petrol ≈ 0.5 L/kWh, diesel ≈ 0.35 L/kWh (fuel only — oil, filters, and engine wear push the true number higher). If you know your real $/kWh, type it directly instead.

Quick Presets:

Wattages are typical values — yours may differ. Cycling appliances (fridges, freezers, air conditioners, pumps) only draw power while running: their slider is hours actually running per day, capped to realistic compressor time, and each row shows the resulting 24-hour average. A modern fridge at the default (100 W running, ~10 h/day) really does use about 1 kWh/day.

Bills include fixed charges and taxes, so this slightly overestimates real use — which is a safe direction to err.

How many of your currency equal 1 US dollar. Auto-filled for your location; change only if you know a different rate.

First run downloads ~2 MB of satellite weather data, then caches it in your browser.

Above 100% the system is sized to produce sellable surplus — without a feed-in credit entered above, that surplus has no cash value and is flagged as clipped waste. The “your target” matrix column and the price-cut curve follow this slider.

Results appear here: a recommended path first, with battery comparisons and all options available below. For grid-tied plans, the result also separates bill reduction from outage backup.

How this was calculated

Run a sizing first - every constant used (derates, temperature model, efficiencies, weather data years and source) is listed here.

What a ~100 kWh Build Is Made Of

A reference parts list so you know what the pieces are and roughly what they cost. Nothing here is sold by this site — prices are indicative figures seen on the open market and change constantly.

Cells

EVE MB31 3.2V 314Ah Cells

Brand new Grade-A prismatic LFP cells. 16S configuration per pack (51.2V nominal).

~$43.50 / cell (indicative ex-works China, Aug 2026)
BMS

JK 200A Active Balance BMS

Smart active balancing (2A balance current), dual temperature probes, RS485/CANbus comms with Sol-Ark & Victron.

~$92.00 / unit (indicative ex-works China, Aug 2026)
Fusing

Eaton Class-T 200A Fuses

20kA AIC interrupt rating @ 160V DC. Clears very high short-circuit DC currents in milliseconds — sized to protect the BMS and wiring.

~$14.50 / unit (indicative, Aug 2026)
Rack & Compression

300 kgf Compression Racks

Belleville spring washer endplates hold uniform compression (about 3,000 N). Manufacturers cite cycle-life benefits; treat specific gains as unverified.

~$28.00 / rack (indicative, Aug 2026)